After you confirm and select your bus number and routes, the first screen of your Pre-Trip Inspection is displayed on your tablet.

You can then head out to your bus.

Your pre-trip inspection is broken up into areas to inspect. Most districts choose to break these up into around 6 areas. These often include:

You can tap the flashlight icon on the top right to turn on the light at the back of the tablet. This is useful for early morning inspections.

Tap the green NEXT AREA button to inspect the next area.

You can tap the yellow REPORT A DEFECT button to report an issue with any inspection item on your bus.

Let's say we found a defect on Area 3, on the front side of the bus that we'd like to report to the mechanics. After tapping the REPORT A DEFECT button a list of inspection items for that Area will display.

Tap the wrench icon button next to the item you want to report as defective or that has an issue.

To report a defect, simply tap the box in front of the specific defect type. Some defects require a note to be added. For example, when reporting graffiti on a seat, the required note would be to identify the seat number.

Tap DONE to return to the Area you are inspecting.

You can always go back to a zone to edit or choose another defect on this final confirmation screen.

Review the Areas inspected and any defects you are reporting. If everything is correct, tap the green SUBMIT button and continue to the Mileage/Fuel level screen.

Your defects are shown in red beneath each zone.

It is important to record accurate mileage. Enter in your starting mileage for your trip here.

Slide the fuel level bar to the position that represents the amount of fuel shown on your fuel gauge on the bus.

When everything looks good, tap the green CONFIRM button to proceed to driving your route!